board: Adafruit KB2040 (https://www.adafruit.com/product/5302)

Makefile

@@ -612,6 +612,8 @@ endif
 	@$(MD5SUM) test.hex
 	$(TINYGO) build -size short -o test.hex -target=qtpy-rp2040         examples/echo
 	@$(MD5SUM) test.hex
+	$(TINYGO) build -size short -o test.hex -target=kb2040              examples/echo
+	@$(MD5SUM) test.hex
 	$(TINYGO) build -size short -o test.hex -target=macropad-rp2040 	examples/blinky1
 	@$(MD5SUM) test.hex
 	$(TINYGO) build -size short -o test.hex -target=badger2040          examples/blinky1

README.md

@@ -43,7 +43,7 @@ See the [getting started instructions](https://tinygo.org/getting-started/) for
 
 You can compile TinyGo programs for microcontrollers, WebAssembly and Linux.
 
-The following 91 microcontroller boards are currently supported:
+The following 92 microcontroller boards are currently supported:
 
 * [Adafruit Circuit Playground Bluefruit](https://www.adafruit.com/product/4333)
 * [Adafruit Circuit Playground Express](https://www.adafruit.com/product/3333)
@@ -59,6 +59,7 @@ The following 91 microcontroller boards are currently supported:
 * [Adafruit ItsyBitsy M0](https://www.adafruit.com/product/3727)
 * [Adafruit ItsyBitsy M4](https://www.adafruit.com/product/3800)
 * [Adafruit ItsyBitsy nRF52840](https://www.adafruit.com/product/4481)
+* [Adafruit KB2040](https://www.adafruit.com/product/5302)
 * [Adafruit MacroPad RP2040](https://www.adafruit.com/product/5100)
 * [Adafruit Matrix Portal M4](https://www.adafruit.com/product/4745)
 * [Adafruit Metro M4 Express Airlift](https://www.adafruit.com/product/4000)

src/machine/board_kb2040.go

@@ -0,0 +1,109 @@
+//go:build kb2040
+
+package machine
+
+import (
+	"device/rp"
+	"runtime/interrupt"
+)
+
+// Onboard crystal oscillator frequency, in MHz.
+const xoscFreq = 12 // MHz
+
+// GPIO Pins
+const (
+	D0  = GPIO0
+	D1  = GPIO1
+	D2  = GPIO2
+	D3  = GPIO3
+	D4  = GPIO4
+	D5  = GPIO5
+	D6  = GPIO6
+	D7  = GPIO7
+	D8  = GPIO8
+	D9  = GPIO9
+	D10 = GPIO10
+)
+
+// Analog pins
+const (
+	A0 = GPIO26
+	A1 = GPIO27
+	A2 = GPIO28
+	A3 = GPIO29
+)
+
+// Note: there is no user-controllable LED on the KB2040 board
+// const LED = notConnected
+
+// I2C Pins.
+const (
+	I2C0_SDA_PIN = GPIO12
+	I2C0_SCL_PIN = GPIO13
+
+	I2C1_SDA_PIN = GPIO2
+	I2C1_SCL_PIN = GPIO3
+
+	SDA_PIN = I2C0_SDA_PIN
+	SCL_PIN = I2C0_SCL_PIN
+)
+
+// SPI default pins
+const (
+	// Default Serial Clock Bus 0 for SPI communications
+	SPI0_SCK_PIN = GPIO18
+	// Default Serial Out Bus 0 for SPI communications
+	SPI0_SDO_PIN = GPIO19 // Tx
+	// Default Serial In Bus 0 for SPI communications
+	SPI0_SDI_PIN = GPIO20 // Rx
+
+	// Default Serial Clock Bus 1 for SPI communications
+	SPI1_SCK_PIN = GPIO26
+	// Default Serial Out Bus 1 for SPI communications
+	SPI1_SDO_PIN = GPIO27 // Tx
+	// Default Serial In Bus 1 for SPI communications
+	SPI1_SDI_PIN = GPIO28 // Rx
+)
+
+// UART pins
+const (
+	UART0_TX_PIN = GPIO0
+	UART0_RX_PIN = GPIO1
+	UART1_TX_PIN = GPIO8
+	UART1_RX_PIN = GPIO9
+	UART_TX_PIN  = UART0_TX_PIN
+	UART_RX_PIN  = UART0_RX_PIN
+)
+
+// UART on the RP2040
+var (
+	UART0  = &_UART0
+	_UART0 = UART{
+		Buffer: NewRingBuffer(),
+		Bus:    rp.UART0,
+	}
+
+	UART1  = &_UART1
+	_UART1 = UART{
+		Buffer: NewRingBuffer(),
+		Bus:    rp.UART1,
+	}
+)
+
+var DefaultUART = UART0
+
+func init() {
+	UART0.Interrupt = interrupt.New(rp.IRQ_UART0_IRQ, _UART0.handleInterrupt)
+	UART1.Interrupt = interrupt.New(rp.IRQ_UART1_IRQ, _UART1.handleInterrupt)
+}
+
+// USB identifiers
+const (
+	usb_STRING_PRODUCT      = "KB2040"
+	usb_STRING_MANUFACTURER = "Adafruit"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x8106
+)

targets/kb2040.json

@@ -0,0 +1,11 @@
+{
+    "inherits": [
+        "rp2040"
+    ],
+    "serial-port": ["239a:8106"],
+    "build-tags": ["kb2040"],
+    "linkerscript": "targets/qtpy-rp2040.ld",
+    "extra-files": [
+        "targets/qtpy-rp2040-boot-stage2.S"
+    ]
+}