Added board definition for Feather nRF52840 Express

README.md

@@ -43,13 +43,14 @@ See the [getting started instructions](https://tinygo.org/getting-started/) for
 
 You can compile TinyGo programs for microcontrollers, WebAssembly and Linux.
 
-The following 37 microcontroller boards are currently supported:
+The following 38 microcontroller boards are currently supported:
 
 * [Adafruit Circuit Playground Bluefruit](https://www.adafruit.com/product/4333)
 * [Adafruit Circuit Playground Express](https://www.adafruit.com/product/3333)
 * [Adafruit CLUE Alpha](https://www.adafruit.com/product/4500)
 * [Adafruit Feather M0](https://www.adafruit.com/product/2772)
 * [Adafruit Feather M4](https://www.adafruit.com/product/3857)
+* [Adafruit Feather nRF52840 Express](https://www.adafruit.com/product/4062)
 * [Adafruit ItsyBitsy M0](https://www.adafruit.com/product/3727)
 * [Adafruit ItsyBitsy M4](https://www.adafruit.com/product/3800)
 * [Adafruit Metro M4 Express Airlift](https://www.adafruit.com/product/4000)

src/machine/board_feather-nrf52840.go

@@ -0,0 +1,105 @@
+// +build feather_nrf52840
+
+package machine
+
+const HasLowFrequencyCrystal = true
+
+// GPIO Pins
+const (
+	D0  = P0_25 // UART TX
+	D1  = P0_24 // UART RX
+	D2  = P0_10 // NFC2
+	D3  = P1_15 // LED1
+	D4  = P1_10 // LED2
+	D5  = P1_08
+	D6  = P0_07
+	D7  = P1_02 // Button
+	D8  = P0_16 // NeoPixel
+	D9  = P0_26
+	D10 = P0_27
+	D11 = P0_06
+	D12 = P0_08
+	D13 = P1_09
+	D14 = P0_04 // A0
+	D15 = P0_05 // A1
+	D16 = P0_30 // A2
+	D17 = P0_28 // A3
+	D18 = P0_02 // A4
+	D19 = P0_03 // A5
+	D20 = P0_29 // Battery
+	D21 = P0_31 // AREF
+	D22 = P0_12 // I2C SDA
+	D23 = P0_11 // I2C SCL
+	D24 = P0_15 // SPI MISO
+	D25 = P0_13 // SPI MOSI
+	D26 = P0_14 // SPI SCK
+	D27 = P0_19 // QSPI CLK
+	D28 = P0_20 // QSPI CS
+	D29 = P0_17 // QSPI Data 0
+	D30 = P0_22 // QSPI Data 1
+	D31 = P0_23 // QSPI Data 2
+	D32 = P0_21 // QSPI Data 3
+	D33 = P0_09 // NFC1 (test point on bottom of board)
+)
+
+// Analog Pins
+const (
+	A0 = D14
+	A1 = D15
+	A2 = D16
+	A3 = D17
+	A4 = D18
+	A5 = D19
+	A6 = D20 // Battery
+	A7 = D21 // ARef
+)
+
+const (
+	LED      = D3
+	LED1     = LED
+	LED2     = D4
+	NEOPIXEL = D8
+	BUTTON   = D7
+
+	QSPI_SCK   = D27
+	QSPI_CS    = D28
+	QSPI_DATA0 = D29
+	QSPI_DATA1 = D30
+	QSPI_DATA2 = D31
+	QSPI_DATA3 = D32
+)
+
+// UART0 pins (logical UART1)
+const (
+	UART_RX_PIN = D0
+	UART_TX_PIN = D1
+)
+
+// UART0 is the USB device
+var (
+	UART0 = USB
+)
+
+// I2C pins
+const (
+	SDA_PIN = D22 // I2C0 external
+	SCL_PIN = D23 // I2C0 external
+)
+
+// SPI pins
+const (
+	SPI0_SCK_PIN  = D26 // SCK
+	SPI0_MOSI_PIN = D25 // MOSI
+	SPI0_MISO_PIN = D24 // MISO
+)
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Adafruit Feather nRF52840 Express"
+	usb_STRING_MANUFACTURER = "Adafruit"
+)
+
+var (
+	usb_VID uint16 = 0x239A
+	usb_PID uint16 = 0x0029
+)

targets/feather-nrf52840.json

@@ -0,0 +1,10 @@
+{
+    "inherits": ["nrf52840"],
+    "build-tags": ["feather_nrf52840","nrf52840_reset_uf2"],
+    "flash-1200-bps-reset": "true",
+    "flash-method": "msd",
+    "msd-volume-name": "FTHR840BOOT",
+    "msd-firmware-name": "firmware.uf2",
+    "uf2-family-id": "0xADA52840",
+    "linkerscript": "targets/circuitplay-bluefruit.ld"
+}