Use the cross compiling toolchains for compiling/linking. This fixes CGo
support, and therefore allows CGo to be used when cross compiling to
Linux on a different architecture.
This commit also removes some redundant testing code.
Add a target for the Adafruit Circuit Playground Bluefruit, which is
based on the nRF52840. Adds the necessary code for the machine
package and the json and linker script files in the targets directory.
The machine package code is based on board_circuitplay_express.go,
with modifications made by consulting the wiring diagram on the
adafruit website here:
https://learn.adafruit.com/adafruit-circuit-playground-bluefruit/downloads
Also adds support to the uf2 conversion packacge to set the familyID
field. The Circuit Playground Bluefruit firmware rejects uf2 files
without the family id set to 0xADA52840 (and without the flag specifying
that the family id is present).
This flag is overloaded. It can be used in two ways:
* Choosing the flash method to use (openocd, msd, command).
* Choosing the OpenOCD programmer name.
For example, you can use one of these to use OpenOCD instead of the
mass-storage device programmer:
tinygo flash -target=microbit -programmer=openocd
tinygo flash -target=microbit -programmer=cmsis-dap
Setting the linker script as one property (instead of as part of the
generic ldflags property) allows it to be overriden.
This is important for the SoftDevice on Nordic chips, because the
SoftDevice takes up a fixed part of the flash/RAM and the application
must be flashed at a different position. With this linkerscript option,
it is possible to create (for example) a pca10040-s132v6 that overrides
the default linker script.
