Somehow moving to LLVM memory intrinsics for calls like memcpy made the
machine.sendUSBPacket get inlined. This is a problem because it is
called in many different functions and it is just big enough to cause a
significant file size increase.
Adding //go:noinline solves this problem and gets the examples/blinky1
program below the file size it was before this change (tested:
itsybitsy-m0, itsybitsy-m4, circuitplay-bluefruit).
Not tested on actual hardware, only on simavr. The main motivation for
adding this chip is to be able to run simulated tests using a much
larger memory space (16kB RAM, 128kB flash) without jumping to the XMega
devices that may not be as well supported by LLVM.
Thanks to Kyle Lemons for the inspiration and original design. The
implementation in this commit is very different however, building on top
of the software vectoring needed in RISC-V. The result is a flexible
interrupt handler that does not take up any RAM for configuration.
With this change, it's no longer necessary to set a specific pin mode:
it will get autodetected in the Configure() call.
Tested on an ItsyBitsy M4 with the mpu6050 example in the drivers repo.
A small footnote in the datasheet says that interrupt source numbers
correspond to the bit position in INTFLAG. We only need the RXC
interrupt for UART. In other words, ony the _2 interrupts (RXC is in the
2nd bit position) needs to be used for UART to work correctly.
In the future, more interrupts may be needed. They can then be added as
necessary.
I2C uses a hardcoded peripheral instead of referring to a specific
peripheral. In addition to that, it refers to the wrong SERCOM
(SERCOM3), which isn't used on any of the atsamd51 boards for I2C.
This commit lets the compiler know about interrupts and allows
optimizations to be performed based on that: interrupts are eliminated
when they appear to be unused in a program. This is done with a new
pseudo-call (runtime/interrupt.New) that is treated specially by the
compiler.
This greatly cuts down on compile time (by about 5x for small programs)
and also makes the program a whole lot smaller. Overall it cuts down
`make smoke-test` in the drivers repository by half (from 160s to 80s).
This will probably also fix the timeout issue in the Playground:
https://github.com/tinygo-org/playground/issues/7
This commit does the same thing as
https://github.com/tinygo-org/tinygo/pull/597 but for samd51 series
chips. Pin mode and pad numbers are automatically calculated from pin
numbers, returning an error if no valid pinout is possible.
Add a target for the Adafruit Circuit Playground Bluefruit, which is
based on the nRF52840. Adds the necessary code for the machine
package and the json and linker script files in the targets directory.
The machine package code is based on board_circuitplay_express.go,
with modifications made by consulting the wiring diagram on the
adafruit website here:
https://learn.adafruit.com/adafruit-circuit-playground-bluefruit/downloads
Also adds support to the uf2 conversion packacge to set the familyID
field. The Circuit Playground Bluefruit firmware rejects uf2 files
without the family id set to 0xADA52840 (and without the flag specifying
that the family id is present).
UART2 was configured with the wrong SERCOM for the used pins (PB22 and
PB23). However, after changing the SERCOM from 3 to 5 that led to a
conflict with UART1 (used for the on-board WiFi). But the used pins are
also usable from SERCOM 3, so in the end I switched SERCOM5 and SERCOM3
around.
With this change, I was able to get examples/echo working.
