Precise globals require a whole program optimization pass that is hard
to support when building packages separately. This patch removes support
for these globals by converting the last use (Linux) to use
linker-defined symbols instead.
For details, see: https://github.com/tinygo-org/tinygo/issues/2870
This shrinks transform.Optimize() a little bit, working towards the goal
of https://github.com/tinygo-org/tinygo/issues/2870. I ran the smoke
tests and there is no practical downside: one test got smaller (??) and
one had a different .hex hash, but other than that there was no
difference.
This should also make TinyGo a liiitle bit faster but it's probably not
even measurable.
The transform package is the more appropriate location for package-level
optimizations, to match `transform.Optimize` for whole-program
optimizations.
This is just a refactor, to make later changes easier to read.
In https://github.com/tinygo-org/tinygo/issues/2777, a poison value
ended up in `runtime.alloc`. This shouldn't happen, especially not for
well written code. So I'm not sure why it happens. But here is a fix
anyway.
There used to be a difference between `byte` and `uint8` in interface
methods. These are aliases, so they should be treated the same.
This patch introduces a custom serialization format for types,
circumventing the `Type.String()` method that is slightly wrong for our
purposes.
This also fixes an issue with the `any` keyword in Go 1.18, which
suffers from the same problem (but this time actually leads to a crash).
ThinLTO optimizes across LLVM modules at link time. This means that
optimizations (such as inlining and const-propagation) are possible
between C and Go. This makes this change especially useful for CGo, but
not just for CGo. By doing some optimizations at link time, the linker
can discard some unused functions and this leads to a size reduction on
average. It does increase code size in some cases, but that's true for
most optimizations.
I've excluded a number of targets for now (wasm, avr, xtensa, windows,
macos). They can probably be supported with some more work, but that
should be done in separate PRs.
Overall, this change results in an average 3.24% size reduction over all
the tinygo.org/x/drivers smoke tests.
TODO: this commit runs part of the pass pipeline twice. We should set
the PrepareForThinLTO flag in the PassManagerBuilder for even further
reduced code size (0.7%) and improved compilation speed.
This removes the parentHandle argument from the internal calling convention.
It was formerly used to implment coroutines.
Now that coroutines have been removed, it is no longer necessary.
This adds support for building with `-tags=llvm13` and switches to LLVM
13 for tinygo binaries that are statically linked against LLVM.
Some notes on this commit:
* Added `-mfloat-abi=soft` to all Cortex-M targets because otherwise
nrfx would complain that floating point was enabled on Cortex-M0.
That's not the case, but with `-mfloat-abi=soft` the `__SOFTFP__`
macro is defined which silences this warning.
See: https://reviews.llvm.org/D100372
* Changed from `--sysroot=<root>` to `-nostdlib -isystem <root>` for
musl because with Clang 13, even with `--sysroot` some system
libraries are used which we don't want.
* Changed all `-Xclang -internal-isystem -Xclang` to simply
`-isystem`, for consistency with the above change. It appears to
have the same effect.
* Moved WebAssembly function declarations to the top of the file in
task_asyncify_wasm.S because (apparently) the assembler has become
more strict.
When I wrote the code originally, I didn't know about SetAlignment so I
hacked a way around it by allocating [...]uintptr types. However, this
allocates a few too many bytes in some cases.
This commit changes this to only allocate the space that we actually
need.
The code size effect is mixed, but generally positive. The combined
average is reduced by 0.27% with more programs being reduced in size
than are increasing in size.
This change implements a new "scheduler" for WebAssembly using binaryen's asyncify transform.
This is more reliable than the current "coroutines" transform, and works with non-Go code in the call stack.
runtime (js/wasm): handle scheduler nesting
If WASM calls into JS which calls back into WASM, it is possible for the scheduler to nest.
The event from the callback must be handled immediately, so the task cannot simply be deferred to the outer scheduler.
This creates a minimal scheduler loop which is used to handle such nesting.
This matches Clang, and with that, it adds support for inlining between
Go and C because LLVM only allows inlining if the "target-cpu" and
"target-features" string attributes match.
For example, take a look at the following code:
// int add(int a, int b) {
// return a + b;
// }
import "C"
func main() {
println(C.add(3, 5))
}
The 'add' function is not inlined into the main function before this
commit, but after it, it can be inlined and trivially be optimized to
`println(8)`.
This is fake debug info. It doesn't point to a source location because
there is no source location. However, it helps to correctly attribute
code size usage to particular packages.
I've also updated builder/sizes.go with some debugging helpers.
Instead of doing everything in the interrupt lowering pass, generate
some more code in gen-device to declare interrupt handler functions and
do some work in the compiler so that interrupt lowering becomes a lot
simpler.
This has several benefits:
- Overall code is smaller, in particular the interrupt lowering pass.
- The code should be a bit less "magical" and instead a bit easier to
read. In particular, instead of having a magic
runtime.callInterruptHandler (that is fully written by the interrupt
lowering pass), the runtime calls a generated function like
device/sifive.InterruptHandler where this switch already exists in
code.
- Debug information is improved. This can be helpful during actual
debugging but is also useful for other uses of DWARF debug
information.
For an example on debug information improvement, this is what a
backtrace might look like before this commit:
Breakpoint 1, 0x00000b46 in UART0_IRQHandler ()
(gdb) bt
#0 0x00000b46 in UART0_IRQHandler ()
#1 <signal handler called>
[..etc]
Notice that the debugger doesn't see the source code location where it
has stopped.
After this commit, breaking at the same line might look like this:
Breakpoint 1, (*machine.UART).handleInterrupt (arg1=..., uart=<optimized out>) at /home/ayke/src/github.com/tinygo-org/tinygo/src/machine/machine_nrf.go:200
200 uart.Receive(byte(nrf.UART0.RXD.Get()))
(gdb) bt
#0 (*machine.UART).handleInterrupt (arg1=..., uart=<optimized out>) at /home/ayke/src/github.com/tinygo-org/tinygo/src/machine/machine_nrf.go:200
#1 UART0_IRQHandler () at /home/ayke/src/github.com/tinygo-org/tinygo/src/device/nrf/nrf51.go:176
#2 <signal handler called>
[..etc]
By now, the debugger sees an actual source location for UART0_IRQHandler
(in the generated file) and an inlined function.
This matches the behavior of Clang, which uses optsize for -Os and adds
minsize for -Oz.
The code size change is all over the map, but using a hacked together
size comparison tool I've found that there is a slight reduction in
binary size overall (-1.6% with the tinygo smoke tests and -0.8% for the
drivers smoke test).
This commit has a few related changes:
* It sets the optsize attribute immediately in the compiler instead of
adding it to each function afterwards in a loop. This seems to me
like the more appropriate way to do it.
* It centralizes setting the optsize attribute in the transform
package, to make later changes easier.
* It sets the optsize in a few more places: to runtime.initAll and to
WebAssembly i64 wrappers.
This commit does not affect the binary size of any of the smoke tests,
so should be risk-free.
This layout parameter is currently always nil and ignored, but will
eventually contain a pointer to a memory layout.
This commit also adds module verification to the transform tests, as I
found out that it didn't (and therefore didn't initially catch all
bugs).
This commit simplifies the IR a little bit: instead of calling
pseudo-functions runtime.interfaceImplements and
runtime.interfaceMethod, real declared functions are being called that
are then defined in the interface lowering pass. This should simplify
the interaction between various transformation passes. It also reduces
the number of lines of code, which is generally a good thing.
This adds support for a construct like this:
type foo func(fn foo)
Unfortunately, LLVM cannot create function pointers that look like this.
LLVM only supports named types for structs (not for pointers) and thus
can't add a pointer to a function type of the same type to a parameter
of that function type.
The fix is simple: cast all function pointers to a void function, in
LLVM IR:
void ()*
Raw function pointers are cast to this type before storing, and cast
back to the regular function type before calling. This means that
function parameters will never refer to its own type because raw
function types are fixed at that one type.
Somehow, this does have an effect on binary size in some cases. The
effect is small and goes both ways. On top of that, there is work
underway in LLVM which would make all pointer types opaque (without a
pointee type). This would make this whole commit useless and therefore
should fix any size increases that might happen.
https://llvm.org/docs/OpaquePointers.html
... instead of setting a special -target= value. This is more robust and
makes sure that the test actually tests different arcitectures as they
would be compiled by TinyGo. As an example, the bug of the bugfix in the
previous commit ("arm: use armv7 instead of thumbv7") would have been
caught if this change was applied earlier.
I've decided to put GOOS/GOARCH in compileopts.Options, as it makes
sense to me to treat them the same way as command line parameters.
This change fixes a bug in which `alloca` memory lifetimes would not extend past the suspend of an asynchronous tail call.
This would typically manifest as memory corruption, and could happen with or without normal suspending calls within the function.
Bug 1790 ("musttail call must precede a ret with an optional bitcast")
is caused by the GC stack slot pass inserting a store instruction
between a musttail call and a return instruction. This is not allowed in
LLVM IR.
One solution would be to remove the musttail. That would probably work,
but 1) the go-llvm API doesn't support this and 2) this might have
unforeseen consequences. What I've done in this commit is to move the
store instruction to a position earlier in the basic block, just after
the last access to the GC stack slot alloca.
Thanks to @fgsch for a very small repro, which I've used as a regression
test.
This patch adds a new pragma for functions and globals to set the
section name. This can be useful to place a function or global in a
special device specific section, for example:
* Functions may be placed in RAM to make them run faster, or in flash
(if RAM is the default) to not let them take up RAM.
* DMA memory may only be placed in a special memory area.
* Some RAM may be faster than other RAM, and some globals may be
performance critical thus placing them in this special RAM area can
help.
* Some (large) global variables may need to be placed in external RAM,
which can be done by placing them in a special section.
To use it, you have to place a function or global in a special section,
for example:
//go:section .externalram
var externalRAMBuffer [1024]byte
This can then be placed in a special section of the linker script, for
example something like this:
.bss.extram (NOLOAD) : {
*(.externalram)
} > ERAM
This commit includes two changes:
* It makes unexported interface methods package-private, so that it's
not possible to type-assert on an unexported method in a different
package.
* It makes the globals used to identify interface methods defined
globals, so that they can (eventually) be left in the program for an
eventual non-LTO build mode.
Closure variables are allocated in a parent function and are thus never
nil. Don't do a nil check before reading or modifying the value.
This commit results in a slight reduction in code size in some test
cases: calls.go, channel.go, goroutines.go, json.go, sort.go -
presumably wherever closures are used.
These two passes are related, but can definitely work independently.
Which is what this change does: it splits the two passes. This should
make it easier to change these two new passes in the future.
This change now also enables slightly better testing by testing these
two passes independently. In particular, the reflect lowering pass got
some actual tests: it was barely unit-tested before.
I have verified that this doesn't really change code size, at least not
on the microbit target. Two tests do change, but in a very minor way
(and in opposite direction).
In many cases, position information is not stored in Go SSA instructions
because they don't exit directly in the source code. This includes
implicit type conversions, implicit returns at the end of a function,
the creation of a (hidden) slice when calling a variadic function, and
many other cases. I'm not sure where this information is supposed to
come from, but this patch takes the value (usually) from the value the
instruction refers to. This seems to work well for these implicit
conversions.
I've also added a few extra tests to the heap-to-stack transform pass,
of which one requires this improved position information.
This allows better escape analysis even without being able to see the
entire program. This makes the stack allocation test case more complete
but probably won't have much of an effect outside of that (as the
compiler is able to infer these attributes in the whole-program
functionattrs pass).
This flag, if set, is a regexp for function names. If there are heap
allocations in the matching function names, these heap allocations will
be printed with an explanation why the heap allocation exists (and why
the object can't be stack allocated).
This allows for adding more advanced tests, for example tests that use
the compiler package so that test sources can be written in Go instead
of LLVM IR.
There is no good reason for func values to refer to interface type
codes. The only thing they need is a stable identifier for function
signatures, which is easily created as a new kind of globals. Decoupling
makes it easier to change interface related code.
The LLVM CoroFrame pass appears to be tripping over this zero-sized
alloca. Therefore, do what the runtime would do: return a pointer to
runtime.zeroSizedAlloc. Or just don't deal with this case. But don't
emit a zero sized alloca to avoid this LLVM bug.
More information: https://bugs.llvm.org/show_bug.cgi?id=49916
The func-lowering pass has started to fail in the dev branch, probably
as a result of replacing the ConstPropagation pass with the IPSCCP pass.
This commit makes the code a bit more robust and should be able to
handle all possible cases (not just ptrtoint).
The constant propagation pass is removed in LLVM 12, so this pass needs
to be replaced anyway. The direct replacement would be the SCCP (sparse
conditional constant propagation) pass, but perhaps a better replacement
is the IPSCCP pass, which is an interprocedural version of the SCCP
pass and propagates constants across function calls if possible.
This is not always a code size reduction, but it appears to reduce code
size in a majority of cases. It certainly reduces code size in almost
all WebAssembly tests I did.
This should result in a small compile time reduction for incremental
builds, somewhere around 5-9%.
This commit, while small, required many previous commits to not regress
binary size. Right now binary size is basically identical with very few
changes in size (the only baremetal program that changed in size did so
with a 4 byte increase).
This commit is one extra step towards doing as much work as possible in
the parallel and cached package build step, out of the serial LTO phase.
Later improvements in this area have this change as a prerequisite.
Sometimes, LLVM may rename named structs when merging modules.
Therefore, we can't rely on typecodeID structs to retain their struct
names.
This commit changes the interface lowering pass to not rely on these
names. The interp package does however still rely on this name, but I
hope to fix that in the future.
This simplifies future changes. While the move itself is very simple, it
required some other changes to a few transforms that create new
functions to add the optsize attribute manually. It also required
abstracting away the optimization level flags (based on the -opt flag)
so that it can easily be retrieved from the config object.
This commit does not impact binary size on baremetal and WebAssembly.
I've seen a few tests on linux/amd64 grow slightly in size, but I'm not
too worried about those.
In rare cases the signature might change as a result of LLVM renaming
some named struct types when multiple LLVM modules are merged. The
easiest workaround is to detect such mismatched signatures and adding a
bitcast: this should be safe as the underlying data is effectively of
the same type.
This commit adds a new transform that converts reflect Implements()
calls to runtime.interfaceImplements. At the moment, the Implements()
method is not yet implemented (how ironic) but if the value passed to
Implements is known at compile time the method call can be optimized to
runtime.interfaceImplements to make it a regular interface assert.
This commit is the last change necessary to add basic support for the
encoding/json package. The json package is certainly not yet fully
supported, but some trivial objects can be converted to JSON.
