This commit changes the number of wait states for the stm32f103 chip to
2 instead of 4. This gets it back in line with the datasheet, but it
also has the side effect of breaking I2C. Therefore, another (seemingly
unrelated) change is needed: the i2cTimeout constant must be increased
to a higher value to adjust to the lower flash wait states - presumably
because the lower number of wait states allows the chip to run code
faster.
Setting the linker script as one property (instead of as part of the
generic ldflags property) allows it to be overriden.
This is important for the SoftDevice on Nordic chips, because the
SoftDevice takes up a fixed part of the flash/RAM and the application
must be flashed at a different position. With this linkerscript option,
it is possible to create (for example) a pca10040-s132v6 that overrides
the default linker script.
Instead of specifying explicit commands, most of these commands have
been replaced by more specific properties.
This is work that will be necessary for an eventual -programmer flag to
the compiler, with which it is possible to select which programmer to
use to flash or debug a chip. That's not very useful for boards that
already include a programmer or bootloader for that purpose, but is very
useful for novel boards or single-purpose boards that are not already
included in TinyGo.
Compared to the already supported stm32f103xx "bluepill" board this:
- features 128 KiB flash memory size ("RB" suffix) instead of 64 KiB, see `targets/stm32f103rb.ld`
- has onboard ST-LINK/V2-1 programmer and debugger requiring different OpenOCD configuration file
- uses USART2 connected to ST-LINK/V2-1 debugger as virtual COM port over USB for `putchar()`
- has a user-accessible button besides the reset button
