This results in smaller and likely more efficient code. It does require
some architecture specific code for each architecture, but I've kept the
amount of code as small as possible.
There is no reason to specialize this per chip as it is only ever used
for JavaScript. Not only that, it is causing confusion and is yet
another quirk to learn when porting the runtime to a new
microcontroller.
This commit improves the timers on various microcontrollers to better
deal with counter wraparound. The result is a reduction in RAM size of
around 12 bytes and a small effect (sometimes positive, sometimes
negative) on flash consumption. But perhaps more importantly: getting
the current time is now interrupt-safe (it previously could result in a
race condition) and the timer will now be correct when the timer isn't
retrieved for a long duration. Before this commit, a call to `time.Now`
more than 8 minutes after the previous call could result in an incorrect
time.
For more details, see:
https://www.eevblog.com/forum/microcontrollers/correct-timing-by-timer-overflow-count/msg749617/#msg749617
This commit makes the output of `tinygo test` similar to that of `go
test`. It changes the following things in the process:
* Running multiple tests in a single command is now possible. They
aren't paralellized yet.
* Packages with no test files won't crash TinyGo, instead it logs it
in the same way the Go toolchain does.
It is always implemented exactly the same way (as an uint8) so there is
no reason to implement it in each target separately.
This also makes it easier to add some documentation to it.
Instead, leave args at its default value (which provides a fake argv[0] as it has for a long time).
linux and mac do not seem affected.
Fixes#1862 (tinygo apps after v0.17.0-113-g7b761fa crash if run without argv[0])
This commit does two things:
1. It makes it possible to grow the heap on Linux and MacOS by
allocating 1GB of virtual memory on startup and then slowly using it
as necessary, when running out of available heap space.
2. It switches the default GC to be the conservative GC (previously
extalloc). This is good for consistency with other platforms that
all use this same GC.
This makes the extalloc GC unused by default.
This heap allocation would normally be optimized away, but with -opt=0
perhaps not. This is a problem if the conservative GC is used, because
the conservative GC needs to be initialized before use.
On some boards the FPU is already enabled on startup, probably as part
of the bootloader. On other chips it was enabled as part of the runtime
startup code. In all these cases, enabling the FPU is currently
unsupported: the automatic stack sizing of goroutines assumes that the
processor won't need to reserve space for FPU registers. Enabling the
FPU therefore can lead to a stack overflow.
This commit either removes the code that enables the FPU, or simply
disables it in startup code. A future change should fully enable the FPU
so that operations on float32 can be performed by the FPU instead of in
software, greatly speeding up such code.
- Add some extra fields: FPUPresent, CPU and NVICPrioBits which may
come in handy at a later time (and are easy to add).
- Rename DEVICE to Device, to match Go style.
This is in preparation to the next commit, which requires the FPUPresent
flag.
This commit replaces most heap allocations in USB related code with
stack allocations. This is important for several reasons:
- It avoids running the GC unnecessarily.
- It reduces code size by 400-464 bytes.
- USB code might be called from interrupt handlers. The heap may be in
an inconsistent state when that happens if main thread code also
performs heap allocations.
The last one is by far the most important one: not doing heap
allocations in interrupts is critical for correctness. But the code size
reduction alone should be worth it.
There are two heap allocations in USB related code left: in the function
receiveUSBControlPacket (SAMD21 and SAMD51). This heap allocation must
also be removed because it runs in an interrupt, but I've left that for
a future change.
This improves compatibility between the regular browser target
(-target=wasm) and the WASI target (-target=wasi). Specifically, it
allows running WASI tests like this:
tinygo test -target=wasi encoding/base32
This currently doesn't work with `tinygo flash` yet (even with
`-programmer=openocd`), you can use pyocd instead. For example, from the
Bluetooth package:
tinygo build -o test.hex -target=microbit-v2-s113v7 ./examples/advertisement/
pyocd flash --target=nrf52 test.hex
I intend to add support for pyocd to work around this issue, so that a simple
`tinygo flash` suffices.
There doesn't appear to be a user-controllable LED outside of the LED
matrix. In fact, the pin assigned for this was P13, which was connected
to the SPI SCK pin.
See "STM32F40x and STM32F41x Errata sheet" - SPI CLK port must be 'fast' or 'very fast' to avoid data corruption on last bit (at the APB clocks we configure).
There is no good reason for func values to refer to interface type
codes. The only thing they need is a stable identifier for function
signatures, which is easily created as a new kind of globals. Decoupling
makes it easier to change interface related code.
This commit refactors PWM support in the machine package to be more
flexible. The new API can be used to produce tones at a specific
frequency and control servos in a portable way, by abstracting over
counter widths and prescalers.
This makes it possible to assign I2C objects (machine.I2C0,
machine.I2C1, etc.) without needing to take a pointer.
This is important especially in the future when I2C may be driven using
DMA and the machine.I2C type needs to store some state.
These stubs don't really belong there: attiny currently doesn't directly
support I2C at all (although it has hardware to support a software
implementation).
They both reversed the direction of the check, in a way that mostly
cancelled each other out. Of course they're still mostly unimplemented,
but it's better if they're not wrong.
This fixes a type system loophole. The following program would
incorrectly run in TinyGo, while it would trigger a panic in Go:
package main
import "reflect"
func main() {
v := reflect.ValueOf(struct {
x int
}{})
x := v.Field(0).Interface()
println("x:", x.(int))
}
Playground link: https://play.golang.org/p/nvvA18XFqFC
The panic in Go is the following:
panic: reflect.Value.Interface: cannot return value obtained from unexported field or method
I've shortened it in TinyGo to save a little bit of space.
These stub functions are necessary for the encoding/json package. They
don't seem to be called in trivial cases, so leave them as simple stubs
for now.
This matches the main Go implementation and (among others) fixes a
compatibility issue with the encoding/json package. The encoding/json
package compares reflect.Type variables against nil, which does not work
as long as reflect.Type is of integer type.
This also adds a reflect.RawType() function (like reflect.Type()) that
makes it easier to avoid working with interfaces in the runtime package.
It is internal only, but exported to let the runtime package use it.
This change introduces a small code size increase when working with the
reflect package, but I've tried to keep it to a minimum. Most programs
that don't make extensive use of the reflect package (and don't use
package like fmt) should not be impacted by this.
Previously there was code to avoid impossible type asserts but it wasn't
great and in fact was too aggressive when combined with reflection.
This commit improves this by checking all types that exist in the
program that may appear in an interface (even struct fields and the
like) but without creating runtime.typecodeID objects with the type
assert. This has two advantages:
* As mentioned, it optimizes impossible type asserts away.
* It allows methods on types that were only asserted on (in
runtime.typeAssert) but never used in an interface to be optimized
away using GlobalDCE. This may have a cascading effect so that other
parts of the code can be further optimized.
This sometimes massively improves code size and mostly negates the code
size regression of the previous commit.
