softonik/tinygo
1
0
Ответвление 0
Код Задачи Слияния Проекты Выпуски Пакеты Вики Активность Действия
3748 коммитов 1 ветвь 0 тегов 11 МиБ
Граф коммитов

3748 коммитов

В этой ветви
В этой ветви
Во всех ветвях
Автор SHA1 Сообщение Дата
Scott Feldman
59838338ba
Add machine.CPUReset() (#3595) 
machine: Add machine.CPUReset() for cortexm
 2023-04-25 19:10:47 +02:00
Ron Evans
76303f9db4 Revert "all: better errors when multiple mcus share VID/PID" 
This reverts commit af9f19615b.
 2023-04-25 18:18:23 +02:00
Ron Evans
4bf8b618e5 Revert "all: honour port for -monitor flash flag" 
This reverts commit 7aac1a1391.
 2023-04-25 18:18:23 +02:00
deadprogram
c89a684ad2 machine/gba: rename display and make pointer receivers 
Signed-off-by: deadprogram <ron@hybridgroup.com>
 2023-04-25 16:43:29 +02:00
Kenneth Bell
7aac1a1391 all: honour port for -monitor flash flag 2023-04-25 11:21:16 +02:00
Kenneth Bell
af9f19615b all: better errors when multiple mcus share VID/PID 2023-04-25 11:21:16 +02:00
deadprogram
79b63dd041 device/gba: additional IO mapping for sound, DMA, SIO, and sprites 
Signed-off-by: deadprogram <ron@hybridgroup.com>
 2023-04-24 18:11:29 +02:00
Damian Gryski
06e34caa5f builder: print the status of the job that just completed 2023-04-22 10:01:02 +02:00
cui fliter
4e9f9e2773 fix some comments 
Signed-off-by: cui fliter <imcusg@gmail.com>
 2023-04-18 22:51:49 +02:00
Ayke van Laethem
64957c5254 samd51: fix ADC multisampling 
Multisampling/averaging (using the Samples configuration property) was
returning incorrect values. When I investigated this, I found that the
samd51 gives erratic values when using multisampling together with fewer
than 16 bits resolution.

I fixed this by forcing 16 bit resolution when multisampling, and
adjusting the output to account for multisampling.

Found while reading the battery value on a pybadge, which gave
non-sensible values with Samples set to a value larger than 1.
 2023-04-18 19:00:11 +02:00
Kenneth Bell
1bba5f5d7b targets: make msd-volume-name an array 2023-04-17 18:56:32 +02:00
deadprogram
48ef68dd86 examples: replace fmt with encoding/hex in usb-midi example 
Signed-off-by: deadprogram <ron@hybridgroup.com>
 2023-04-17 08:54:06 +02:00
Damian Gryski
8b9bee4cad main: don't print ok for a successful compile-only 2023-04-16 03:38:33 +02:00
Elliott Sales de Andrade
b4c9b579b8 Switch interp tests to opaque pointers 2023-04-16 03:34:46 +02:00
Damian Gryski
2b1dc4fee5 testing: add -test.shuffle to order randomize test and benchmark order 2023-04-12 20:43:41 +02:00
Damian Gryski
0244bed033 testdata: add test for else/defer bug 2023-04-11 18:54:05 -07:00
Damian Gryski
60b23a7035 compiler: update test outputs 2023-04-11 18:54:05 -07:00
Damian Gryski
4326c8f10e compiler: ensure all defers have been seen before creating rundefers 
Fixes #3643
 2023-04-11 18:54:05 -07:00
Damian Gryski
1672610749 testing: move runtime.GC() call to runN to match upstream 2023-04-11 12:16:25 +02:00
Damian Gryski
e00a2395d9 testing: fix benchmark logging output 2023-04-11 12:16:25 +02:00
sago35
42175496eb machine/atsamd51: remove extra BK0RDY clear 2023-04-10 09:16:52 +02:00
Ayke van Laethem
3b4e543f4e rp2040: use DMA for send-only SPI transfers 
This improves slightly. It also is some groundwork for better DMA
support in TinyGo in the future.

I'm not entirely sure why it improves performance (in theory the old
code should already saturate the SPI bus) but it does, so 🤷
 2023-04-04 12:22:52 +02:00
Kenneth Bell
ad3e9e1a77 i2c: implement target mode for rp2040 and nrf 2023-04-04 09:36:42 +02:00
Kenneth Bell
e0385e48d0 nrf: new peripheral type for nrf528xx chips 2023-04-04 09:36:42 +02:00
Kenneth Bell
feadb9c85c nrf: move nrf52 family code to correct file name 2023-04-04 09:36:42 +02:00
Kenneth Bell
4bf7308d26 machine: make gosched available to machine package 2023-04-04 09:36:42 +02:00
Ayke van Laethem
19e4db45db samd51: use correct SPI frequency 
The SPI frequency was rounded up, not rounded down. This meant that if
you wanted to configure 15MHz for example, it would pick the next
available frequency (24MHz). That's unsafe, the safe option is to round
down and the SPI support for most other chips also rounds down for this
reason.

In addition, I've improved SPI clock selection so that it will pick the
best clock of the two, widening the available frequencies. See the
comments in the patch for details.
 2023-04-03 19:40:20 +02:00
sago35
71b44e79b3 machine/usb/hid/joystick: allow joystick settings override 2023-04-03 00:50:30 +02:00
deadprogram
9e97566b5f machine/usb/hid/joystick: move joystick under HID as it belongs and also remove duplicate code 
Signed-off-by: deadprogram <ron@hybridgroup.com>
 2023-04-03 00:50:30 +02:00
Ayke van Laethem
7d83e76833 rp2040: use 4MHz as default frequency for SPI 
This matches other SPI implementations. I think the original value of
115200 was from a confusion with UART.
 2023-04-02 01:04:37 +02:00
Damian Gryski
9e7882b1b7 reflect: uncomment a another test the fails and doc some that don't 2023-04-01 22:46:46 +02:00
Damian Gryski
0c4f9d1f19 reflect; uncomment SetZero (but comment out the parts that fail) 2023-04-01 22:46:46 +02:00
Damian Gryski
a85cb22193 reflect: uncomment TestAppend and fix a bug it found 2023-04-01 22:46:46 +02:00
Damian Gryski
60bb832c89 reflect: handle Convert'ing between identical underlying types 
Needed for go-jose/v3
 2023-04-01 22:46:46 +02:00
Ayke van Laethem
6eda52a289 rp2040: remove SPI deadline 
Removing it improves SPI performance by about 20% for me (updating the
display of a Gopher Badge).
 2023-04-01 11:18:51 +02:00
Damian Gryski
8badf79af9 testing: remove unused variable left over from count prototyping 2023-03-31 19:17:02 -07:00
Damian Gryski
66d3c4edb8 main: fix typos in flag usage messages 2023-03-31 19:17:02 -07:00
Damian Gryski
63aaa43072 testing: add test.skip 
Fixes #3056
 2023-03-31 19:17:02 -07:00
Damian Gryski
ee81c31884 testing: import new version of match.go 2023-03-31 19:17:02 -07:00
Damian Gryski
50d681359d main: set WASMTIME_BACKTRACE_DETAILS when running in wasmtime. 
I find myself consistently running tests, seeing them panic, and then
immediately running them again with this environment variable set.  It's
easier to just have tinygo do this for me.
 2023-03-31 13:06:23 -07:00
Damian Gryski
d50c54fce0 Makefile: compress/lzw seems to work on wasi now. 2023-03-31 20:41:51 +02:00
Damian Gryski
4a81cac53b main: make sure all testing output goes to the same place 2023-03-31 09:07:13 +02:00
Damian Gryski
84a3273131 main: fix tests with default TestConfig.Count=0 doesn't skip all tests 2023-03-31 09:07:13 +02:00
Damian Gryski
9182664845 testing: make test output unbuffered when verbose 
Fixes #3579
 2023-03-31 09:07:13 +02:00
Damian Gryski
a2f95d6b87 main: stuff test runner options into their own struct 
Fixes #2406
 2023-03-31 09:07:13 +02:00
Damian Gryski
698b1f19c6 testing: support -test.count 
This makes running benchmarks repeatedly easier.
 2023-03-31 09:07:13 +02:00
Damian Gryski
e6ccdd9d1a reflect: another obscure RO bug 2023-03-31 01:08:04 +02:00
Damian Gryski
b39a982067 reflect: uncomment another test and fix RO logic issues it uncovered 2023-03-31 01:08:04 +02:00
Ayke van Laethem
e0bf376068 rp2040: unify all linker scripts using LDFLAGS 
The only thing that's different between all these chips is the flash
size, which can easily be passed as a linker flag instead. This removes
a bunch of duplicate code in an uncommon language (linker script).

I've also fixed a few boards with incorrect flash sizes:

  * nano-rp2040 has 16MB instead of 2MB
  * macropad-rp2040 has 8MB instead of 2MB
  * gopher-badge has 8MB instead of 1MB
 2023-03-30 23:49:02 +02:00
Damian Gryski
b044d4ff3d reflect: add more RO checks 2023-03-30 21:10:54 +02:00