Ron Evans
0312f12696
machine/usb: set the vid and pid to valid values supplied by Adafruit and Arduino for boards that support USB CDC
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2020-03-18 12:08:15 +01:00
Daniel Esteban
2778377ac9
Nano33 IoT: default SPI should be D13/D11/D12 instead of A2/A3/A6 ( #781 )
...
* Nano33 IoT: default SPI should be D13/D11/D12 instead of A2/A3/A6
2019-12-15 15:21:33 +01:00
Ayke van Laethem
c97b7221bd
machine: support arduino-nano33 on play.tinygo.org
2019-12-11 21:49:19 +01:00
BCG
5171618284
Added SPI1 connected to NINA-W102 chip on Arduino Nano 33 IOT
2019-11-19 08:40:32 +01:00
Ayke van Laethem
4397152108
machine/samd21: switch UART to use new pin configuration
...
This allows all possible UART pin configurations to be used and avoids
some tricky configuration.
2019-10-07 17:49:52 +02:00
Ayke van Laethem
d266e44bc5
machine/samd21: use pins specified in I2CConfig
...
Instead of configuring machine.I2C0, machine.I2C1, etc. statically,
allow the pins to be set using machine.I2CConfig. This will also
automatically configure the correct pin mode for each pin instead of
having to specify that manually.
2019-10-07 17:25:49 +02:00
Ayke van Laethem
3fa926c512
machine/atsamd21: refactor SPI pin handling to only look at pin numbers
...
Pin mode and pad numbers are automatically calculated from the pin
numbers, returning an error if no pinout could be found.
2019-10-01 21:31:00 +02:00
Ron Evans
f5fd49bb74
machine/samd21: use PinMode for SPI SERCOM peripheral to allow for more configuration options on boards like Arduino Nano33-IoT that have many predefined pin mappings
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2019-09-17 21:28:05 +02:00
Ron Evans
7d481c179f
machine/atsamd21: uses different required magic values for BOSSA and UF2 bootloaders
...
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2019-09-14 16:18:30 +02:00
BCG
8a5fa51f60
Updated SPI pins so that they are configurable, enabling multiple SPI sercoms for ATSAMD21
2019-08-28 11:19:52 +02:00
Ron Evans
fc9188a298
machine/samd21/arduino-nano33: adds support for Arduino Nano33 IoT along with mapping to NINA-W102 WiFi chip.
...
Also adds DTR and RTS functions along with timeouts to USBCDC functions to prevent lockups.
Signed-off-by: Ron Evans <ron@hybridgroup.com>
2019-07-07 18:09:05 +02:00
