softonik/tinygo
1
0
Ответвление 0
Код Задачи Слияния Проекты Выпуски Пакеты Вики Активность Действия
2934 коммитов 1 ветвь 0 тегов 11 МиБ
Граф коммитов

522 коммитов

Автор SHA1 Сообщение Дата
Yusuke Mitsuki
1322f404a6
stm32: add support for the STM32F4Discovery 
Signed-off-by: Yusuke Mitsuki <mickey.happygolucky@gmail.com>
 2019-04-13 13:32:05 +02:00
Ron Evans
85f2ef40f8 machine/itsybitsy-m0: set pins and pin mode mapping for i2c0 bus 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-04-05 15:25:11 +02:00
Ron Evans
ae4ead8690 machine/circuitplay: correct pin and pin mode mapping for both i2c0 (external) and i2c1 (internal) buses 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-04-05 14:31:26 +02:00
Ron Evans
9d6df2b4c7
machine/samd21: implement ADC 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-03-06 17:01:16 +01:00
Ron Evans
665c3bdaa6 machine/samd21: implement SPI interface for currently supported SAMD21 boards 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-03-04 21:47:09 +01:00
Ron Evans
3538ba943c machine/samd21: move definitions for I2C interfaces into board files, since pin connections on each SAMD21-based board implementation can differ 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-03-04 20:54:13 +01:00
Ron Evans
543696eafc machine/samd21: correct get/setPinCfg and get/setPMux functions for PORTB pins 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-03-04 20:53:07 +01:00
Ron Evans
4424fe087d machine/circuitplay_express: add basic support for Adafruit Circuit Playground express pin mappings 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-24 23:01:22 +01:00
Ron Evans
34939ab422 machine/atsamd21: add GPIO_INPUT_PULLUP and GPIO_INPUT_PULLDOWN GPIO pin config options 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-24 21:20:59 +01:00
Ron Evans
c56b2a45fa
machine/samd21: handle PINMUX and PINCFG registers correctly for PORTB pins 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-24 17:43:11 +01:00
Ayke van Laethem
b1c70d85f7 nrf: add CPU frequency 2019-02-24 13:45:10 +01:00
Ayke van Laethem
6e8df2fc40 samd21: define and use hardware pin numbers 2019-02-23 16:20:56 +01:00
Ayke van Laethem
902f40867f samd21: add GPIO support for port B 2019-02-23 13:53:59 +01:00
Ron Evans
5438f16fcb
machine/atsamd21: support for USB CDC aka serial interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-23 13:34:00 +01:00
Ron Evans
942d4903ce
machine/atsamd21: extracts functionality for processor family into shared files. 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-20 14:16:09 +01:00
Daniel Esteban
0a3dbbd1cb Added regular pins const for bbc:microbit (#181) 
* Added "GPIO/Analog" pins const for bbc:microbit
 2019-02-11 16:33:10 +01:00
Ron Evans
c3a15885f5
machine/itsybitsym0: correct comments for UART1 pin mapping and note which of the analog pin mapping require the second port, which is not yet implemented 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-01 13:15:01 +01:00
Ayke van Laethem
914d383a96
all: update import paths to github.com/tinygo-org/tinygo 2019-01-31 17:43:19 +01:00
Ron Evans
19b4476cbb
Implement PWM interface for SAMD21 (#157) 
* machine/atsamd21: implement PWM interface for all pins that support it
* machine/atsamd21: correct PWM channel mapping for pin PA18
* machine/atsamd21: move clock init into InitPWM() to hopefully save power
 2019-01-28 13:48:52 +01:00
Ron Evans
4f4d7976c6
Add core support for multiple UARTs (#152) 
* machine/uart: add core support for multiple UARTs by allowing for multiple RingBuffers
* machine/uart: complete core support for multiple UARTs
* machine/uart: no need to store pointer to UART, better to treat like I2C and SPI
* machine/uart: increase ring buffer size to 128 bytes
* machine/uart: improve godocs comments and use comma-ok idiom for buffer Put/Get methods
 2019-01-25 22:09:13 +01:00
Ron Evans
3ebf464da2
machine/samd21: I2C implementation 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-21 21:54:43 +01:00
Ron Evans
38c5e384af
machine/itsybitsy-m0: specify which pins to use for UART0 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-21 21:14:06 +01:00
Ron Evans
65ea74bd84
machine/atsamd21: implements UART0 using the SERCOM0 interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-21 21:14:00 +01:00
Ron Evans
8cbbbb0e76
machine/atsamd21: improve GPIO config to support all 32 pins on PORTA as well as correct handling for OUTPUT and SERCOM pin modes 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-20 18:42:52 +01:00
Ron Evans
e2be7ccf76
sam: add support for Atmel SAMD21 based ItsyBitsy M0 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-18 18:30:27 +01:00
Ron Evans
b8c326d710
machine/stm32f103xx: implmentation for I2C interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-10 16:10:25 +01:00
Ron Evans
dccfae485c
machine/stm32f103xx: support for SPI interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-12-31 14:59:07 +01:00
Ron Evans
f71e1bcf03
machine/stm32f103xx: implementation of RTC/TIM based timers 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-12-31 14:39:05 +01:00
Ron Evans
5ff5873fe6
machine/microbit: add default pin mappings for SPI bus 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-12-22 17:20:40 +01:00
Ron Evans
47b667a4b8
machine/stm32: add support for stm32f103xx UART 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-12-18 17:17:18 +01:00
Ayke van Laethem
9eaa6a7d7f
nrf: set interrupt priorities 
The default priority is 0 (highest) which is reserved by the SoftDevice.
For normal operation the exact priority level doesn't matter, only the
relative priority matters. So this change makes the code compatible with
the SoftDevice without actually changing the behavior.
 2018-12-03 13:50:41 +01:00
Ron Evans
7857c7235b machine/nrf52840: add support for ADC and PWM interfaces 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-12-02 19:00:33 +01:00
Ron Evans
06ab3a836f
machine/nrf: SPI master implementation 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-12-02 13:26:08 +01:00
Ron Evans
8325f2a53d
reelboard: support Reel Board (nrf52840 dev board) 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-12-01 18:25:36 +01:00
Ron Evans
8f35a4711a
pca10056: support this nrf52840-based board 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-12-01 18:19:42 +01:00
Ron Evans
ce0ad1daa2
pca10031: add support for PCA10031 nrf51 wireless dongle 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-11-21 10:36:36 +01:00
Ayke van Laethem
bf4a43ef04
machine/avr: implement raw GPIO access for bitbanged drivers 2018-11-20 21:04:43 +01:00
Ayke van Laethem
9392ef900d
avr: add support for the digispark 
Blinking the on-board LED works. Nothing else has been tested yet.
 2018-11-20 18:50:24 +01:00
Ayke van Laethem
1ba463c7ee
machine: redesign I2C interface 2018-11-16 23:08:41 +01:00
Ayke van Laethem
c4ef2908ee
microbit: fix pin numbers for ADC and I2C 2018-11-11 19:23:09 +01:00
Ayke van Laethem
daf92226d8
nrf: add nrf52840-mdk board 
With the help of Chillance on GitHub.
 2018-10-18 15:07:06 +02:00
Ayke van Laethem
ccee42ec7a
machine: add helpers for bit-banged driver support 
The returned pointer and value can be used to set or clear a specific
pin.
 2018-10-15 19:56:27 +02:00
Ron Evans
ca13bfd992
microbit: add SetEntireLEDMatrixOn() function 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-10-08 20:38:21 +02:00
Ron Evans
c516a11004
microbit: add functions for LED matrix and correct button pin mapping 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-10-07 19:40:16 +02:00
Ayke van Laethem
bc9210b674
nrf: add micro:bit board 2018-10-06 13:04:14 +02:00
Ron Evans
e4fa1a8288
nrf: I2C interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-10-05 12:50:43 +02:00
Ron Evans
8f7b7e6ee3
nrf52: implement ADC and PWM interfaces 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-10-04 13:56:44 +02:00
Ayke van Laethem
3e98fbcdc8
avr: use machine.UART0 as stdout 2018-10-04 13:38:12 +02:00
Ron Evans
ef2ac09561
nrf: implement UART interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-10-02 17:08:31 +02:00
Ron Evans
4c8a725d78
avr: implement UART interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2018-10-01 12:02:59 +02:00