Do it all at once in preparation for Go 1.18 support.
To make this commit, I've simply modified the `fmt-check` Makefile
target to rewrite files instead of listing the differences. So this is a
fully mechanical change, it should not have introduced any errors.
In the early days of TinyGo, the idea of `postinit` was to enable
interrupts only after initializers have run. Which kind of makes
sense... except that `time.Sleep` is allowed in init code and
`time.Sleep` requires interrupts to be enabled. Therefore, interrupts
must be enabled while initializers are being run.
This commit simply moves the enabling of interrupts to a point right
before running package initializers. It also removes `runtime.postinit`,
which is not necessary anymore (and was only used on AVR).
There were a few issues that were causing qemu-system-arm and
qemu-system-riscv to give the wrong exit codes. They are in fact capable
of exiting with 0 or 1 signalled from the running application, but this
functionality wasn't used. This commit changes this in the following
ways:
* It fixes SemiHosting codes, which were incorrectly written in
decimal while they should have been written in hexadecimal (oops!).
* It modifies all the baremetal main functions (aka reset handlers) to
exit with `exit(0)` instead of `abort()`.
* It changes `syscall.Exit` to call `exit(code)` instead of `abort()`
on baremetal targets.
* It adds these new exit functions where necessary, implemented in a
way that signals the correct exit status if running under QEMU.
All in all, this means that `tinygo test` doesn't have to look at the
output of a test to determine the outcome. It can simply look at the
exit code.
There is no reason to specialize this per chip as it is only ever used
for JavaScript. Not only that, it is causing confusion and is yet
another quirk to learn when porting the runtime to a new
microcontroller.
This commit refactors both determining the current time and sleeping for
a given time. It also improves precision for many chips.
* The nrf chips had a long-standing TODO comment about a slightly
inaccurate clock. This should now be fixed.
* The SAM D2x/D5x chips may have a slightly more accurate clock,
although probably within the error margin of the RTC. Also, by
working with RTC ticks and converting in the least number of places,
code size is often slightly reduced (usually just a few bytes, up to
around 1kB in some cases).
* I believe the HiFive1 rev B timer was slightly wrong (32768Hz vs
30517.6Hz). Because the datasheet says the clock runs at 32768Hz,
I've used the same conversion code here as in the nrf and sam cases.
* I couldn't test both stm32 timers, so I kept them as they currently
are. It may be possible to make them more efficient by using the
native tick frequency instead of using microseconds everywhere.
This is the kind that is used in Go (actually CGo) for exporting
functions. I think it's best to use //export instead of our custom
//go:export pragma, for consistency (they are equivalent in TinyGo).
Therefore I've updated all instances to the standard format (except for
two that are updated in https://github.com/tinygo-org/tinygo/pull/1024).
No smoke tests changed (when comparing the output hash), except for some
wasm tests that include DWARF debug info and tend to be flaky anyway.
This is necessary for better CGo support on bare metal. Existing
libraries expect to be able to include parts of libc and expect to be
able to link to those symbols.
Because with this all targets have a working libc, it is now possible to
add tests to check that a libc in fact works basically.
Not all parts of picolibc are included, such as the math or stdio parts.
These should be added later, when needed.
This commit also avoids the need for the custom memcpy/memset/memcmp
symbols that are sometimes emitted by LLVM. The C library will take care
of that.
Thanks to Kyle Lemons for the inspiration and original design. The
implementation in this commit is very different however, building on top
of the software vectoring needed in RISC-V. The result is a flexible
interrupt handler that does not take up any RAM for configuration.
This is the same problem as in
https://github.com/tinygo-org/tinygo/pull/605, but other targets also
suffer from it.
Discovered with the GBA target, but as pointed out in
https://bugs.llvm.org/show_bug.cgi?id=42881#c1 this appears to be a bug
in the way external globals are declared, not in LLVM. Therefore I
decided that fixing it everywhere would be the best thing to do.
