softonik/tinygo
1
0
Ответвление 0
Код Задачи Слияния Проекты Выпуски Пакеты Вики Активность Действия
3530 коммитов 1 ветвь 0 тегов 11 МиБ
Граф коммитов

649 коммитов

Автор SHA1 Сообщение Дата
Ayke van Laethem
9846c062b3 targets: add support for GameBoy Advance 
Only tested in an emulator (mGBA). Almost nothing is supported, but
drawing to the screen works.
 2019-08-05 09:19:49 +02:00
Ayke van Laethem
54169c714f all: use baremetal build tag 
This simplifies adding more baremetal targets, like a GameBoy Advance,
or baremetal x86 for unikernels.
 2019-08-04 17:12:07 +02:00
Ron Evans
fc9188a298 machine/samd21/arduino-nano33: adds support for Arduino Nano33 IoT along with mapping to NINA-W102 WiFi chip. 
Also adds DTR and RTS functions along with timeouts to USBCDC functions to prevent lockups.

Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-07-07 18:09:05 +02:00
Ayke van Laethem
ffa38b183b all: add HiFive1 rev B board with RISC-V architecture 
This page has been a big help in adding support for this new chip:
https://wiki.osdev.org/HiFive-1_Bare_Bones
 2019-07-07 14:03:24 +02:00
Daniel Esteban
1fd0c8d48c adds PowerSupplyActive to enable supply voltages to nRF52840 and (#430) 
* machine/reelboard: adds PowerSupplyActive to enable supply voltages to nRF52840 and
peripherals.
 2019-06-30 12:23:44 +02:00
Daniel Esteban
d34bb7e708 add reelboard pins for the epaper display and the reset pin (#429) 
* machine/reelboard: added descriptive pin names for the epaper display and the reset pin
 2019-06-30 09:57:07 +02:00
Ayke van Laethem
4ecd478d82 machine: add generic board support on non-baremetal hardware 
Instead of trying to modify periperhals directly, external functions are
called. For example, __tinygo_gpio_set sets a GPIO pin to a specified
value (high or low). It is expected that binaries made this way will be
linked with some extra libraries that implement support for these
functions.

One particularly interesting case is this experimental board simulator:
https://github.com/aykevl/tinygo-play
Compiling code to WebAssembly with the correct build tag for a board
will enable this board to be simulated in the browser.

Atmel/Microchip based SAMD boards are not currently supported, because
their I2C/SPI support is somewhat uncommon and harder to support in the
machine API. They may require a modification to the machine API for
proper support.
 2019-06-28 10:00:14 +02:00
Ayke van Laethem
f2c205a008 machine: update ringbuffer to use runtime/volatile.Register8 
This avoids the //go:volatile pragma, which will be removed soon.
There were no changes to the output of the smoke tests.
 2019-06-06 19:46:49 +02:00
Ayke van Laethem
9673ad3774 all: move Register{8,16,32} values into runtime/volatile 
This avoids duplication of code. None of the smoke tests have changed
their output.
 2019-06-06 19:46:49 +02:00
Ron Evans
2504754325 machine/samd21: use HasBits() method to simplify bit comparisons 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-05-27 18:43:11 +02:00
Ron Evans
be491abc46 machine/stm32: use HasBits() method to simplify bit comparisons 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-05-27 18:43:11 +02:00
Ron Evans
31189deb3b machine/avr: use HasBits() method to simplify bit comparisons 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-05-27 18:43:11 +02:00
Ayke van Laethem
94b8214529 machine: refactor pins to be of Pin type 2019-05-26 20:48:50 +02:00
Ron Evans
9f8340a970 machine/nrf: refactor to use volatile package/API 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-05-24 15:44:33 +02:00
k-brk
0f6873cf02 machine/stm32f103xx: fix i2c 2 byte read 2019-05-24 15:26:06 +02:00
Ayke van Laethem
3568254593 machine/atsamd21: fix analog pin mode 2019-05-23 20:37:10 +02:00
Ron Evans
e4d53daa02 machine/stm32: refactor to use new volatile package for all register access 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-05-21 15:08:43 +02:00
Ron Evans
de032cddd2 machine/sam: Refactor all machine/runtime code to use new volatile package/API 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-05-19 19:53:11 +02:00
Ron Evans
51c6b972bf machine/feather-m0: correct board build tag and add placeholders for I2S interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-05-19 19:52:14 +02:00
Anthony Elder
4cd151faf5 Add Feather M0 Board (#356) 
* Add Feather M0 Board
 2019-05-19 17:10:17 +02:00
Martin Treml
fc2ed2bdd0 [Board] Adafruit Trinket (#333) 
* Add support for Adafruit Trinket-M0 board
 2019-05-14 19:30:39 +02:00
Ayke van Laethem
e0cf74e638 avr: use register wrappers that use runtime/volatile.*Uint8 calls 
This avoids the //go:volatile pragma on types in Go source code, at
least for AVR targets.
 2019-05-14 12:24:01 +02:00
Anthony Elder
8d3f19bc84 Fix I2C signalStop in readLastByte for Microbit (#344) 
* Fix I2C signalStop in readLastByte for Microbit
 2019-05-13 14:30:25 +02:00
Ron Evans
d90f1947d9 machine/samd21: Initial implementation of I2S hardware interface using Circuit Playground Express 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-05-12 21:51:07 +02:00
Daniel Esteban
fb952a722a Remove microbit matrix (#319) 
* Remove matrix code from bbc:microbit, and move it to a driver
 2019-05-05 16:25:50 +02:00
Ron Evans
b2e96fc35a machine/atsamd21: select internal ground for ADC and scale result correctly to 16-bit 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-04-22 07:59:35 +02:00
Ron Evans
8d3b5a58d1 machine/atsamd21: correct pad/pin handling when using both UART and USBCDC interfaces at same time 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-04-17 22:50:08 +02:00
Yusuke Mitsuki
1322f404a6
stm32: add support for the STM32F4Discovery 
Signed-off-by: Yusuke Mitsuki <mickey.happygolucky@gmail.com>
 2019-04-13 13:32:05 +02:00
Ron Evans
85f2ef40f8 machine/itsybitsy-m0: set pins and pin mode mapping for i2c0 bus 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-04-05 15:25:11 +02:00
Ron Evans
ae4ead8690 machine/circuitplay: correct pin and pin mode mapping for both i2c0 (external) and i2c1 (internal) buses 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-04-05 14:31:26 +02:00
Ron Evans
9d6df2b4c7
machine/samd21: implement ADC 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-03-06 17:01:16 +01:00
Ron Evans
665c3bdaa6 machine/samd21: implement SPI interface for currently supported SAMD21 boards 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-03-04 21:47:09 +01:00
Ron Evans
3538ba943c machine/samd21: move definitions for I2C interfaces into board files, since pin connections on each SAMD21-based board implementation can differ 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-03-04 20:54:13 +01:00
Ron Evans
543696eafc machine/samd21: correct get/setPinCfg and get/setPMux functions for PORTB pins 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-03-04 20:53:07 +01:00
Ron Evans
4424fe087d machine/circuitplay_express: add basic support for Adafruit Circuit Playground express pin mappings 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-24 23:01:22 +01:00
Ron Evans
34939ab422 machine/atsamd21: add GPIO_INPUT_PULLUP and GPIO_INPUT_PULLDOWN GPIO pin config options 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-24 21:20:59 +01:00
Ron Evans
c56b2a45fa
machine/samd21: handle PINMUX and PINCFG registers correctly for PORTB pins 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-24 17:43:11 +01:00
Ayke van Laethem
b1c70d85f7 nrf: add CPU frequency 2019-02-24 13:45:10 +01:00
Ayke van Laethem
6e8df2fc40 samd21: define and use hardware pin numbers 2019-02-23 16:20:56 +01:00
Ayke van Laethem
902f40867f samd21: add GPIO support for port B 2019-02-23 13:53:59 +01:00
Ron Evans
5438f16fcb
machine/atsamd21: support for USB CDC aka serial interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-23 13:34:00 +01:00
Ron Evans
942d4903ce
machine/atsamd21: extracts functionality for processor family into shared files. 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-20 14:16:09 +01:00
Daniel Esteban
0a3dbbd1cb Added regular pins const for bbc:microbit (#181) 
* Added "GPIO/Analog" pins const for bbc:microbit
 2019-02-11 16:33:10 +01:00
Ron Evans
c3a15885f5
machine/itsybitsym0: correct comments for UART1 pin mapping and note which of the analog pin mapping require the second port, which is not yet implemented 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-02-01 13:15:01 +01:00
Ayke van Laethem
914d383a96
all: update import paths to github.com/tinygo-org/tinygo 2019-01-31 17:43:19 +01:00
Ron Evans
19b4476cbb
Implement PWM interface for SAMD21 (#157) 
* machine/atsamd21: implement PWM interface for all pins that support it
* machine/atsamd21: correct PWM channel mapping for pin PA18
* machine/atsamd21: move clock init into InitPWM() to hopefully save power
 2019-01-28 13:48:52 +01:00
Ron Evans
4f4d7976c6
Add core support for multiple UARTs (#152) 
* machine/uart: add core support for multiple UARTs by allowing for multiple RingBuffers
* machine/uart: complete core support for multiple UARTs
* machine/uart: no need to store pointer to UART, better to treat like I2C and SPI
* machine/uart: increase ring buffer size to 128 bytes
* machine/uart: improve godocs comments and use comma-ok idiom for buffer Put/Get methods
 2019-01-25 22:09:13 +01:00
Ron Evans
3ebf464da2
machine/samd21: I2C implementation 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-21 21:54:43 +01:00
Ron Evans
38c5e384af
machine/itsybitsy-m0: specify which pins to use for UART0 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-21 21:14:06 +01:00
Ron Evans
65ea74bd84
machine/atsamd21: implements UART0 using the SERCOM0 interface 
Signed-off-by: Ron Evans <ron@hybridgroup.com>
 2019-01-21 21:14:00 +01:00